Mixers

2015 SAC 3575 Mixer Wagon/Feed Wagon

2015 SAC 3575 Mixer Wagon Upgraded to a larger Feed wagon a couple years ago. Kept this one for a spare but haven't really used for a few years. Twin Screws.

Livestock Equip. - Bismarck, ND

$35,000

2024-11-22 18:02:13

NDE 654 TMR vertical mixer

555 cubic ft, front right hand incline conveyor, newer liner and auger, walking tandem axles.

Livestock Equip. - Dunn Center, ND

$25,000 OBO

2024-11-22 18:00:30

1050 cubic ft capacity, 54 right hand conveyor incline, cv pto, 20 knives, super single tires. 5 year warranty

New Cloverdale 900T

Livestock Equip. - Dunn Center, ND

$85,000

2024-11-22 18:00:23

Used Supreme/Segue 6T mixer

, 634 cubic ft capacity, upgraded heavy duty planetaries, low hr mixer in excellent condition, right hand fixed incline conveyor with left hand reversible flat discharge,

Livestock Equip. - Dunn Center, ND

$49,500

2024-11-22 11:15:07

GEHL 95 mixer / grinder

Livestock Equip. - Buchanan, ND

$3,300

2024-11-22 07:21:17

Nde vertical mixer. 1000 pto. Scale. Planetary is 5 years old. Auger is 4 years

old. And conveyor chain is 2 years old

Livestock Equip. - Lambert, MT

$10,000 OBO

2024-11-21 09:29:03

2 Photos

Used Roto Mix 653-16

Serial #80083594 Weight: 14,700 lbs Struck level capacity: 653 cubic feet Width: 94 in with 3 ft conveyor up Height: 108 in with trailer standard tires Discharge conveyor

Livestock Equip. - Edgeley, ND

$15,900

2024-11-20 13:41:54

Knight 2450

Used Knight 2450 available. Contact Chad or Jason for more information.

Livestock Equip. - Edgeley, ND

$13,900

2024-11-19 14:38:32

Horizontal augers Could help with delivery

Mixer Wagon

Livestock Equip. - Ulen, MN

$8,000

2024-11-19 14:24:03

8 Photos

Bear Cat 1260 feed grinder mixer

. Ready to work as it should and always kept inside. Hammers are good, also has the forage mill, but I've never used it. New tires & many new hydraulic hoses last

Livestock Equip. - Donnybrook, ND

$4,000 OBO

2024-11-19 10:55:30

ALLIS-CHALMERS 299 Manure Spreader

1970 Political B.S. Spreader. PTO Drive. It looks to have minimal use. The beaters are in good shape. It has all the shields. The tires hold air. The paint is pretty

Livestock Equip. - Beach, ND

$1,800 OBO

2024-11-19 07:51:14

4 auger mixer with auger discharge, good condition with digistar scalehead.

Knight botec 4042

Livestock Equip. - Dunn Center, ND

$22,000

2024-11-18 20:27:08

Farmhand 900B tub grinder

900Farmhand low hours on rods and hammers, New hydraulic pump. new tire works good just upgraded. extra screen Has been converted from gear box to belt drive.

Livestock Equip. - Bismarck, ND

$7,500 OBO

2024-11-17 14:42:18

540 PTO Works good $26k obo

Kuhn VT 144

Livestock Equip. - Middle River, MN

$26,000 OBO

2024-11-17 13:56:07

Gehl 7190 feed wagon decent shape just don’t use

Livestock Equip. - Westhope, ND

$5,000 OBO

2024-11-17 13:33:38

Very nice condition. Low use. Set up as left hand discharge, but can easily be swapped to right hand. Bottom knives are new extended wear from Koomia. Tandem high flotation axle.

Jaylor 5750HD

Livestock Equip. - Linton, ND

$55,000 OBO

2024-11-15 20:53:10

6 Photos

MFS 480 Horizontal mixer

Just traded, coming in soon. Right hand discharge. Walking tandem axles.

Livestock Equip. - Dunn Center, ND

2024-11-15 06:08:37

715 cubic ft mixer is one of the largest single auger mixers available. 13 knives, walking tandem axles, cv pto, 54” right hand incline conveyor, weightronix scalehead.

New Cloverdale 720

Livestock Equip. - Dunn Center, ND

$56,000 OBO

2024-11-13 21:01:59

Jaylor 5750HDVery clean feed wagon ready to go to work. Just installed new rubber

top. Installed new orbit motor on conveyor. New PTO shaft one year ago. New knives a year ago.

Livestock Equip. - Napoleon, ND

$44,500

2024-11-12 18:18:42

KC 6516 Feed Wagon, made by MidMach in Jamestown, specs on the box are listed in the one image. It doesnt have scales on it, but the frame is made to add them easily. Floor,

KC 6516 Feed Wagon

Livestock Equip. - Maxbass, ND

$6,000 OBO

2024-11-08 17:33:37

, sale pending 485 cf, 4.5 ft long conveyor, walking tandem axles, 8 knives on auger, point scalehead.

2025 NDE S500

Livestock Equip. - Dunn Center, ND

$39,800 OBO

2024-11-08 17:33:20

. Needs front planetary and liner welded in. Running gear is good, two speed gear box. 950 cubic ft capacity. We can supply new planetary and liner to fit.

Mixer project

Livestock Equip. - Dunn Center, ND

$9,500

2024-11-08 17:33:12

Coming in soon. 615 patz with rubber top extension, tub magnet and external display. Conveyor slides out. Truck has Cummins with manual and low range. Live hydraulics mounted

615 patz truck mixer tmr

Livestock Equip. - Dunn Center, ND

- New NDE U700d, 700 cubic ft twin auger mixer with walking tandem axles, rubber top, right hand Incline conveyor

2024-11-08 17:32:51

6 Photos

NDE U700d

Livestock Equip. - Dunn Center, ND

2024-11-08 17:32:40

New NDE FS950 Tmr vertical mixer

In stock now. 950 cubic ft , rubber top extension, carbide tipped knives, trailer suspension, super single truck tires

Livestock Equip. - Dunn Center, ND

2024-11-08 17:32:35

NDE FS850D tmr vertical mixer

NDE Fs850 tmr vertical mixer New 850 cubic ft dual auger mixer with 3 ft conveyor with right hand delivery. Semi trailer suspension. Rubber top extension, constant velocity pto shaft. Last pictures

Livestock Equip. - Dunn Center, ND

2024-11-08 17:32:03

NDE U850d Vertical mixer/tmr

-NDE U850d Vertical mixer/tmr 2025, New mixer with dual augers , 850 cubic ft capacity, walking tandem axles, xl scale indicator, cv pto, carbide knives, 3 ft front incline conveyor. Nice low

Livestock Equip. - Dunn Center, ND

2024-11-08 17:31:56

Mixer Repair and mixer parts

Cloverdale knives bolt into most vertical mixers on the market. Knives, scaleheads, weighbars, conveyors, augers, liners, bearings, conveyor chain for every brand of

Livestock Equip. - Dunn Center, ND

2024-11-08 16:14:23

New NDE FS700 tmr vertical mixer

Single auger with tungsten knives, 3 ft front incline conveyor, walking tandem axles, rubber top extension, constant velocity pto shaft, point scale.

Livestock Equip. - Dunn Center, ND

$53,000

2024-11-06 10:55:17